Wire Marking Machines And Specifications
Wire marking machines is considered a vital aspect when it comes to electrical work; you should e able to tell the difference between wires that you are working with. In some instances, this could be a matter of life and death. This machine is able to process patterns onto wires of any size or thickness and make it something that is clearly readable. The size and fonts of the printing on the wires could be done in any size and font that you prefer; there is a huge variety from which you are able to choose. If you are working with twisted wires, the differentiation of these would not be a task; the marking would be of high resolution. The marking is able to be done horizontally as well as vertically this is your preference. There is an optional extra should you wish to have the installation date printed on the wires and/or the time. The wire marking machines are really handy when you are dealing with live wires and/or have lives at steak.
Laser wire marking machines gives you the best quality that you can find, the highest contrast, the markings are permanent, there are graphics as well as the printed information is easy to understand and readable at the same time. The use of this systems is known to be safer than any other systems today, as the laser wire marking systems does not melt the wiring as that of the hot stamping, this is known to cause fire hazards and is not very safe to use. The international aerospace industry is known to have given these laser machines the go ahead, as it was tested and tried by them. What came from this test is that the laser markings do not wear off because of solvents as well as friction and the insulation is complete.
The UV (Ultra Violet) markings are achieved by the amalgamation of the laser energy on the exterior of the cable padding and this in turn, creates a result with the UV pigments (titanium dioxide). This reaction then causes the titanium dioxide particles that are now found in the cabling to have a colour change and this would then change to a crystal state. You will then notice that there is a black colour on the white insulation, this mark would be about 20 microns into the wire; this would then create a durable marking on the cable. This would now leave the cable subject to any liquids and abrasions.
The laser systems were designed for convenience, and the item also brought down the cost of labour drastically. The one noticeable thing that was marked on this product is that production time was more than halved. The high speed marking, would work on any coloured insulation and even PTFE, otherwise known as Teflon. There are many other fluroropolymer materials with which you are able to use this laser wire marking machines for, it would easily print on twisted cables, multicore and round wires, as well as single cores.
