The laser of the CO2 laser engraving machine is a CO2 radio frequency laser, which is a gas laser with high power and high electro-optical conversion rate. Due to the high laser power, various non-metallic products can be engraved and marked. CO2 laser engraving machine is therefore widely used in gift box packaging, finishing and other fields.

Due to the continuous increase of users, more and more users buy this kind of engraving machine, and the demand is also increasing, and the disadvantages of using more and more are naturally exposed. With the widespread use of CO2 laser engraving machines, everyone will always find some potential glitches.

For example, during the engraving and marking process, the engraved product may be damaged, or may not be engraved and marked at a pre-set position, resulting in random engraving. During the marking process, the optical path of the CO2 laser engraving machine is not marked according to the preset trajectory, but is marked at will, causing damage to the product.

These small problems will be very troublesome, and the cost of engraving will increase accordingly. Is there a way to avoid such a problem? In fact, there is. We can check the machines ourselves to avoid similar situations in the future.

The first thing to do is to determine whether the voltage is stable. Only when the voltage is stable and the power supply is normal can it work normally. Check the interference problem of the marking machine again to see if there are strong interfering objects around, or there is static interference.

Then check the pattern to be printed for errors during production. If the above problem does not exist, please check whether the general settings of the software are normal. No problem at all.

Many people will ask you how long this marking machine can be used, and the mechanical equipment needs maintenance. The carbon dioxide laser engraving machine has a complete set of maintenance methods to make its service life closer to the theoretical life.

Carbon dioxide laser engraving machine is also called carbon dioxide laser engraving machine. It is divided into two types, one is glass tube and metal tube. In terms of service life, the service life of metal pipes is relatively long, but the maintenance methods are roughly the same