Dot matrix laser engraving is similar to high-definition dot matrix printing. The laser head swings left and right to carve a line composed of a series of points each time, and then the laser head moves up and down together to carve multiple lines to form a full-page image or text. The scanned graphics, text and vectorized graphics and texts can be carved with dot matrix.

Vector cutting is different from dot-matrix carving. Vector cutting is carried out on the outer contour line of graphics and text. We generally use this mode to cut through wood, acrylic, paper and other materials, and can also mark on a variety of data surfaces.

Engraving speed: Engraving speed refers to the speed of laser head movement. Generally, IPS (inch/second) indicates that high speed brings high production power. Speed is also used to control the depth of cutting. For a specific laser intensity, the slower the speed, the greater the depth of cutting or carving. You can adjust the speed by using the engraving machine panel or by using the computer's print driver. In the range of 1% to 100%, the adjustment fluctuation is 1%. The advanced motion control system of Hummer allows you to obtain ultra-fine carving quality at high speed

Engraving intensity: Engraving intensity refers to the intensity of the laser emitted on the data surface. For a specific cutting speed, the greater the intensity, the greater the depth of cutting or cutting. You can use the faceplate of the carving machine to adjust the strength, or you can use the print driver of the computer to adjust the strength. In the range of 1% to 100%, the adjustment fluctuation is 1%. The greater the intensity, the greater the speed. The deeper the incision

Spot size: The size of the laser beam spot can be adjusted by using lenses with different focal lengths. The lens with small light spot is used for high resolution carving. The lens with large light spot is used for carving with lower resolution, but for the choice of vector cutting. The standard equipment of the new equipment is a 2.0 inch lens. Its light spot size is in the middle, suitable for various occasions.

Laser engraving machine can carve materials: wood products, plexiglass, metal plate, glass, stone, crystal, Corinne, paper, two-color plate, aluminum oxide, leather, resin, spray metal.